We Make Solar Hot Water Simple to Install

RESOL AM1 Alarm Module

Alarm module for signaling system failures The Alarm module AM1 ensures that occurring failures can be immediately recognized and repaired, even if the system and the controller are difficult to access or located in a remote place. Thus, the reliability and the stable yield of the system are ensured.

This product can only be purchased by members.
SKU: 180 008 70 Category:

Description

The Alarm module AM1 is designed to signal system failures. It is to be connected to the VBus® of the controller and issues an optical signal via the red LED if a failure has occurred.

The AM1 also has a dry contact relay output, which can e. g. be connected to a building management system (BMS). Thus, a collective error message can be issued in the case of a system failure.

Depending on the controller and the sensors connected, different fault conditions can be signaled, e. g. sensor failures, excess or negative system pressure as well as errors in the flow rate, such as a dry run of the pump.

The Alarm module AM1 ensures that occurring failures can be immediately recognized and repaired, even if the system and the controller are difficult to access or located in a remote place. Thus, the reliability and the stable yield of the system are ensured.

Reliable failure signal by LED
Connection to a building management system (BMS) possible
Supply and control via RESOL VBus®
Technical Data

Technical Data

Housing: plastic (PC 2207 UV); base part: Karilen E 42 D - H201
Protection type: IP 54
Dimensions: 111 × 68 × 40 mm / 4.37" × 2.67" × 1.57"
Mounting: wall mounting
Ambient temperature: -13 ... +158 °F
Display: 1 LED
Supply: RESOL VBus®
Interface: RESOL VBus®
Output: 1 dry contact relay
Switching capacity: max. 30 V (DC), 1A;
125 V~ (AC), 0,5 A

Additional information

Weight .25 lbs

Reviews

There are no reviews yet.

Be the first to review “RESOL AM1 Alarm Module”

Your email address will not be published. Required fields are marked *