You need to login in order to view our special installer pricing. Please register and/or login here.

RESOL AM1 Alarm Module

SKU: 180 008 70

Availability: In stock



OR

Quick Overview

Alarm module for signaling system failures

The Alarm module AM1 ensures that occurring failures can be immediately recognized and repaired, even if the system and the controller are difficult to access or located in a remote place. Thus, the reliability and the stable yield of the system are ensured.

AM1 Alarm Module

More Views

  • AM1 Alarm Module

Product Description

The Alarm module AM1 is designed to signal system failures. It is to be connected to the VBus® of the controller and issues an optical signal via the red LED if a failure has occurred.

The AM1 also has a dry contact relay output, which can e. g. be connected to a building management system (BMS). Thus, a collective error message can be issued in the case of a system failure.

Depending on the controller and the sensors connected, different fault conditions can be signaled, e. g. sensor failures, excess or negative system pressure as well as errors in the flow rate, such as a dry run of the pump.

The Alarm module AM1 ensures that occurring failures can be immediately recognized and repaired, even if the system and the controller are difficult to access or located in a remote place. Thus, the reliability and the stable yield of the system are ensured.

  • - Reliable failure signal by LED
  • - Connection to a building management system (BMS) possible
  • - Supply and control via RESOL VBus®


Technical Data

Housing: plastic (PC 2207 UV); base part: Karilen E 42 D - H201
Protection type: IP 54
Dimensions: 111 × 68 × 40 mm / 4.37" × 2.67" × 1.57"
Mounting: wall mounting
Ambient temperature: -13 ... +158 °F
Display: 1 LED
Supply: RESOL VBus®
Interface: RESOL VBus®
Output: 1 dry contact relay
Switching capacity: max. 30 V (DC), 1A;
125 V~ (AC), 0,5 A